When your handpiece stops working, it is usually because the turbine bearings are shot and need replacement. Our turbine rebuild offers a more economical alternative to replacing the entire turbine every time. We carefully remove the old bearings and any other parts too worn to use. After a thorough cleaning, we install new bearings and O rings, calibrate and test your handpiece, and return it to you running almost as good as new.
Ceramic Bearings Available As of June 1, 2009, you can get most handpieces rebuilt with Ceramic bearings for $20.00 more. Ceramic bearings are lighter and harder than steel, and may extend the life of your handpiece turbine. Please request this option on our work order form if you would like ceramic bearings installed in your handpiece.
Steel Bearings | Ceramic Bearings | |
Midwest Quiet Air, Lever | $99.95 | $119.95 |
Tradition, Tradition L, XGT | $99.95 | $119.95 |
Midwest Stylus | $129.95 | |
Star 430 SWL (lubricated) | $99.95 | $119.95 |
Star 430 LUBE FREE ONE Year Warranty | $179.00 | |
Kavo 630, 640, 642, Mira Lux | $99.95 | $119.95 |
Kavo 6000 | $99.95 | $119.95 |
Kavo 6500 | $129.95 | $129.95 |
Adec, W&H | $99.95 | $119.95 |
Lares | $99.95 | $119.95 |
NSK, Kinetics | $99.95 | $119.95 |
Impact Air 45 | $99.95 | $119.95 |
LTL (maintenance free) | $109.95 | |
Push Button Canister Rebuild | $89.95 | |
Push Button Canister New | $149.00 | |
Standard Canister | $79.95 | (3-month warranty) |
When the automatic chuck (pushbutton or lever) in your handpiece turbine stops gripping the bur safely you have two options. You can replace the entire turbine with a new turbine, or we can repair, or sometimes replace, just the autochuck and get it to meet factory specifications again. This is a separate repair from the turbine rebuild, and carries a separate six month warranty. If your bearings are in good enough condition then the only charge will be for the autochuck repair by itself. If we are not able to repair or replace your autochuck, we will then recommend a new turbine.
Autochuck Repair/Replacement (Six Month Warranty) – $90.00
Star, Midwest Fiber Optic Replacement – $179.00
Kavo Cellular Optic Replacement – $249.00
Star Body Shell Service – $75.00
Air/Water Line Clearing, Minor Service – $45.00
Internal Air/Water Line Replacement – $110.00
Motor Overhauls | One Year Warranty |
Star Titan II & III | $159.00 |
Midwest Tru Torc I & II | $159.00 |
Midwest Shorty I & II | $159.00 |
Midwest Rhino, RDH | $159.00 |
Champion Little Guy | $159.00 |
Six Month Warranty | |
Micromite | $159.00 |
Lynx Motors | $159.00 |
Micro Motors | $159.00 |
Kavo Motors | $249 and up |
Motor Rethreads | $85.00 |
Low Speed Angles | Three Month Warranty |
Latch Angle Rebuild | $75.00 / $129.00 |
PB Latch Angle Rebuild | $95.00 / $129.00 |
Kavo Angle Rebuild | $149.00 |
New Ball Bearing Angle | $95.00 |
New Universal Latch Angle | $30.00 |
Star Titan S Scaler | One Year Warranty |
Star Titan S/SW Rebuild | $149.00 |
Rotor Replacement | $50.00 (three month warranty) |
After years of providing fast, reliable, cost effective handpiece repair to dental professionals, ER Handpiece Repair has expanded its capabilities to include all office based medical/dental professionals and surgical facilities. We offer complete repair services for all powered surgical instruments.
Our Powered Surgical Instrument Repair Center has made an extensive commitment to computer aided design and manufacturing methods to ensure component quality and reliability. In-house component re-engineering and machining have pioneered new levels of quality assurance in powered instrument repair while providing Significant cost savings to the end user. Our goal is to meet or exceed original manufacturer’s specifications in all aspects of instrument repair.
We service a full line of powered instruments and components including-but not limited to-the following manufacturers.
Due to the critical nature of powered surgical instruments and a commitment to patient and end user safety, repair prices can only be quoted after an extensive diagnostic evaluation. No charge is incurred for estimate generation or refusal.
Limited Warranty Handpiece Express warrants all repairs performed on powered instruments and components against defects in replacement parts, materials and labor. All repairs are warranted for 90 days. This warranty is limited to repairs performed by the Surgical Instrument Repair Center.
This warranty does not apply to any equipment subjected to misuse; abuse; improper installation or operation; or that which has been altered or adjusted by any person other than Handpiece Express authorized surgical instrument technician.
Disclaimer: Hall, Stryker, 3M, Zimmer, and MicraAirelDePuy are all registered trade names. No implication is made or intended that any of these listed companies in any way endorse any of our suppliers or services. Handpiece Express does not make or imply any claims of obligation with any of these companies by the use of these names.
Electric speed increasing attachments operate closer to a low speed gear angle than a high speed air turbine. There are 2 bearings in the head that can be replaced like a high speed turbine, but the power is transferred to the head by a series of gears. Once your attachment starts to heat up, you need to send it in for service IMMEDIATELY. Continued use will result in greater damage to the gears and drivetrain components resulting in a more costly repair. Sometimes the OEM factory overhaul can be a better value depending on what needs to be replaced. Generally, if there is significant damage beyond just the head bearings we will recommend the factory repair.
Electric 1:5 Speed Increasing Attachment Head Rebuild | Three Month Warranty |
Kavo 25LHA, 25LPA | $249.00 – $295.00 |
Kavo 25LHA or 25LPA Factory Overhaul | $599.00 One year Warranty |
Adec WA-99LT | $249.00 – $295.00 |
NSK E95LT | $229.00 – $295.00 |
Star | $229.00 – $295.00 |
NSK Factory Overhaul | $450.00 |
Bein Air CA1541 Factory Trade In | $750.00 |
ER Handpiece Repair, located in Joliet, Illinois, is owned and operated by Eric and Laura Reibenstein. Originally from Canton, Ohio, Eric and Laura relocated to Plainfield in 2001. Eric then chose to pursue his dream of being his own boss and owning his own business. Thus, ER Handpiece Repair was founded and has grown steadily ever since.
ER Handpiece Repair is dedicated to meeting all your handpiece repair needs, through quality, timely servicing. We offer complete service on all makes and models of handpieces, including powered surgical instruments. Your satisfaction with our service is our primary goal, and we look forward to working with you.
Thank you for the opportunity to earn your business.
Made with in the
by Nitro-Tech
Cookie | Duration | Description |
---|---|---|
cookielawinfo-checkbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
cookielawinfo-checkbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
cookielawinfo-checkbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |